S1 Resources (Original Version)
S1 Upgrade Kit Install Guide
Overview The S1 Upgrade Kit is designed to improve the reliability of the original S1 by replacing the gearboxes and...
Cleaning Out the S1
Cleaning the S1 Gearboxes with Compressed Air Over time, small debris and filament dust can accumulate inside the gearbox, leading...
Original S1 Firmware Update Guide (Not for S1 Plus)
When to Update Firmware? ⚠️ This guide is for the original S1 ONLY, These steps will not work on the...
Filament Jam Troubleshooting
Symptoms It is possible that errors in the setup of the S1 can cause filament to get stuck during initial...
S1 General Troubleshooting Guide
How the S1 Works Overview The S1 works using a force feedback system. It pushes filament forward constantly as the...
S1 User Manual
Introduction Purpose of the Manual This manual provides instructions for setting up and operating the Infinity Flow S1, an automated...
S1 Setup Guide
Introduction Step 1 Setup Info Welcome to the Setup Guide for the S1. Here you will find a step by...
