Flashforge Adventure 5M & 5M Pro Adapter

This document contains information for the Flashforge Adventure 5M & 5M Pro adapter, designed to work with the Infinity Flow S1 filament loader. To connect the S1 to your 5M & 5M Pro, you'll need an adapter that links the Bowden tube from the S1 to your printer's extruder.

This adapter is available here for download or purchase on our website.

Zip File Download: Flashforge 5M Adapter

Contents:

• 5M_Adapter.stl (Printable file)
• 5M_adapter.spt (CAD file)

Printer Compatibility

• Flashforge Adventure 5M
• Flashforge Adventure 5M Pro

Making the Adapter

Step 1: Print the Part

Print Settings:

• 0.20mm Layer Height
• Enable Auto Supports
• Print in orientation in picture

Step 2: Remove the support material

Step 2: Adapter Assembly

• Take off rubber grommet if present on the press fit fitting (ECAS04)
• Press fitting into adapter using pliers, a press, or a vise

Adapter Installation

Step 1: Remove the front cover 

• Remove the print head cover by pulling out the bottom and lifting upwards.

Step 2: Remove the Bowden Tube

Step 3: Insert Adapter

• Slide the adapter over the existing bowden tube inlet.

Step 4: Insert the bowden tube 

• Press the Bowden tube through the adapter 
• Make sure it goes all the way into the existing bowden tube inlet on your printer
• Replace the cover and you’re ready to begin printing :)