Creality Ender 3 V3 KE & SE Adapter

This document contains information for connecting the Creality Ender 3 V3 KE and SE printers to the Infinity Flow S1 automatic filament loader. To connect the S1 to your 3D printer, you'll need an adapter that links the Bowden tube from the S1 to your printer's extruder.

This adapter is available for download or purchase on our website.

Zip File Download: Creality Ender 3 V3 KE,SE Adapter

Contents:

• Ender_3_v3_KE_SE_Adapter.stl (Printable file)
• Ender_3_v3_KE_SE_Adapter.spt (CAD file)

Printer Compatibility

• Creality Ender 3 V3 KE
• Creality Ender 3 V3 SE

Making the Adapter

Step 1: Print the Part

Print Settings:

• 0.20mm Layer Height
• Print in orientation in picture

Step 2: Adapter Assembly

• Take off rubber grommet if present on the press fit fitting
• Press fitting into adapter using pliers, a press, or a vise

Adapter Installation

Step 1: Remove 2x M3 Screws 

• Remove two M3 screws from the print head (circled in red below).
• Remove the ribbon cable strain relief.

Step 2: Install the Adapter

• Slide the adapter into place 
• Screw the adapter into place using the two M3 screws you previously removed.

Step 3: Insert the bowden tube 

• Press the Bowden tube through the adapter 
• Make sure it is fully seated and you are ready to begin printing :-)