Universal Compatibility
- No firmware modifications needed.
- Works with Bowden and direct drive extruders.
- Setup in under 10 minutes
Basic Requirements
-
Secure Bowden Tube Inlet or Adapter
Many printers and extruders already have a connection point but some may need an adapter. This adapter can be purchased or 3D printed.
⚠️ Friction fits are not secure enough. A 4mm pneumatic fitting like the ECAS04 or similar is recommended. ⚠️
-
Smooth Filament Path
There must be a smooth filament path into the printer’s extruder.Catching points in any adapters or the print head’s inlet can create problems when using the S1. Take a look at our filament jam troubleshooting guide for more details.
-
A Strong Extruder
In order to work with the S1 your 3D printer must have a sufficiently strong extruder in order to pull filament through the S1 once it runs out. Most geared extruders are more than strong enough.
-
1.75 mm Filament
The S1 is currently only available for printers using 1.75mm diameter filament. Larger filament like 2.85 mm is not supported.
User Tested Printers
- Based on testing by our team or customer experiences
- This is not a complete list of every printer the S1 is compatible with
- Some printers on this list may require additional purchased or 3D printed adapters not listed
Infinity Flow S1 - 3D Printer Compatibility
Anycubic
- Kobra 2 Neo – Bowden Coupler required
- Kobra 2 Max – Bowden Coupler required
- Kobra 2 Plus – Bowden Coupler required
- Kobra 2 Pro – Bowden Coupler required
- Kobra 3 – No adapter data available
- Kobra 3 Max – No adapter data available
- Kobra S1 – Bowden coupler required
Bambu Labs
- A1 – Bambu Labs A1 & A1 mini Adapter required
- A1 mini – Bambu Labs A1 & A1 mini Adapter required
- P1P – Bowden Coupler required
- P1S – Bowden Coupler required
- X1 – Bowden Coupler required
- X1C – Bowden Coupler required
Creality
- Ender 3 Pro – No adapter data available
- Ender 3 V3 – No adapter required
- Ender 3 V3 Plus – No adapter required
- Ender 5 S1 – Bowden Coupler required
- Ender 5 Max – Bowden Coupler required
- K1 – Bowden Coupler required
- K1 SE – Bowden Coupler required
- K1 Max – Bowden Coupler required
- K1C – Bowden Coupler required
- K2 – Bowden Coupler required
- K2 Plus – Bowden Coupler required
Elegoo
- Centauri Carbon – Bowden Coupler required
- Centauri – Bowden Coupler required
- Neptune 4 – AdapterComing Soon...
- Neptune 4 Max – AdapterComing Soon...
- Neptune 4 Plus – AdapterComing Soon...
- Neptune 4 Pro – AdapterComing Soon...
- Orange Storm Giga – No adapter required
Flashforge
- Adventure 5M – Flashforge Adventure 5M (Pro) required
- Adventure 5M Pro – Flashforge Adventure 5M (Pro) required
Prusa
- MK4 – Prusa MK4 & MK4s required
- MK4s – Prusa MK4 & MK4s required
- MK3 – Modifications May Be Required
- MK3s – Modifications May Be Required
- Core 1 – bowden coupler required
- XL – Modifications May Be Required
Qidi
- Plus 4 – No adapter data available
- X-Max 3 – No adapter required
- Q1 Pro – Bowden Coupler required
- X-Plus 3 – No adapter required
Infimech
- TX – No adapter required
Proforge
- 300 – No adapter data available
Ratrig
- v-core 4 – Bowden Coupler required
Snapmaker
- Artisan 3 in 1 – No adapter data available
Sovol
- SV08 – Bowden Coupler required
Voron
- 0.2 – No adapter required
- 2.4 – No adapter required
Adapters
-
Bambu A1 & A1 mini - Infinity Flow S1 Adapter
Regular price $5.99 USDRegular priceUnit price per -
Bowden Couplers
Regular price $5.99 USDRegular priceUnit price per -
Bowden Tube Press Fit Fitting ECAS04
Regular price $5.99 USDRegular priceUnit price per -
Flashforge Adventure 5M & 5M Pro - Infinity Flow S1 Adapter
Regular price $5.99 USDRegular priceUnit price per -
Prusa MK4 & MK4S - Infinity Flow S1 Adapter
Regular price $5.99 USDRegular priceUnit price per
